Isonem EP Primer 5 Kg Solvent-Free Epoxy Primer

Product Description

ISONEM EP PRIMER 5 Kg is an epoxy resin-based, solvent-free and two-component professional primer material. It fills capillary gaps by providing deep penetration on concrete surfaces, increases surface strength and creates a strong adherence bridge for epoxy or polyurethane coatings to be applied on it. Thanks to its low viscosity structure, it easily penetrates the surface and provides maximum adhesion performance. With its moisture tolerant structure, it offers safe application even in difficult construction site conditions. It is environmentally friendly and hygienic as it does not contain solvents. It is a critical infrastructure product for long-lasting and robust application in industrial floor covering systems. Highlights Epoxy resin based, two component primer Solvent-free and environmentally friendly High penetration and adherence power Increases concrete strength Prepares the ideal subfloor for epoxy and polyurethane coatings Moisture tolerant structure Easy to apply and spread homogeneously Technical Specifications Density (A): 1.00 ± 0.10 g/mL Viscosity (A): 500 – 2000 mPa.s Solids Ratio: 100% Water Transfer: < 0.1 kg/m² (Class W3) Adhesion Strength: ≥ 1.0 – 2.0 N/mm² Water Vapor Permeability: 5 ≤ SD ≤ 50 (Class II) Mixing Life: 30 – 40 min Areas of Use Concrete floor priming applications Preparation before epoxy and polyurethane coating Industrial floor systems Warehouse, factory and parking lot floors Screed and concrete surface reinforcement Application Information Surface Preparation: The surface must be clean, sound and dry. Oil, dirt and loose particles must be completely removed. Mechanical abrasion (sandblasting, etc.) is recommended. Mixture Preparation: Component A is mixed at low speed A homogeneous mixture is obtained by adding component B. Mixing time: minimum 4 minutes Usage time: 30–40 minutes Application Method: Applied with brush or roller If necessary, remove air bubbles with a puffer roller Application Terms: Surface temperature must be at least +3°C above dew point Consumption: 0.25 – 0.40 kg/m² Coverage Area 5 kg set: 12.5 – 20 m² Packaging and Storage Packaging: 5 kg set Color: component A transparent, component B brown Shelf Life: 24 months Storage: Should be stored in a cool and dry environment