Isonem Liquid Glass 4 Kg Set Liquid Glass, Transparent and Bright Water Insulation

Product Description

ISONEM Liquid Glass is a two-component, transparent and high-performance waterproofing coating. It provides perfect adhesion on many different surfaces, from glass to ceramics, from marble to metal, creating a seamless and durable protection. Thanks to its high water resistance, chemical resistance and UV stability, it offers long-lasting use both indoors and outdoors. It retains its transparent structure after drying; It does not cause yellowing, fading or blistering. Thanks to this feature, it solves insulation problems without damaging the existing coating, especially in areas such as balconies, terraces and bathrooms, without aesthetic loss. ISONEM Liquid Glass, which is also preferred as a decorative and protective coating, gives the surface a bright and transparent appearance while also creating a strong insulation barrier. Highlights Two-component professional insulation system Transparent and decorative coating High chemical and physical resistance Resistant to UV and outdoor weather conditions Does not cause yellowing, fading or blistering Very wide surface compatibility Possibility of application without removing the existing coating Technical Specifications Density (Component A): 0.90 ± 0.10 g/mL Density (Component B): 0.95 ± 0.10 g/mL Viscosity (B): 0 – 500 mPa.s Water Transfer: < 0.1 kg/m² (Class W3) Adhesion Strength: ≥ 1.0 N/mm² Water Vapor Permeability: 5 ≤ SD ≤ 50 (Class II) Mixing Life: 50 – 60 min Solvent: Organic solvent Areas of Use Glass and glass brick surfaces Ceramics, tiles, porcelain and mosaics Marble, granite and natural stone surfaces Wooden and concrete surfaces Balcony, terrace and bathroom floors Kitchen and exterior coverings Ornamental pools and decorative surfaces Application Information Surface Preparation: The surface must be completely clean, dry and sound. Oil, dirt, dust and all residues that may reduce adherence should be removed. Joints on ceramic and tile surfaces must be solid. Application Method: Components A and B are mixed homogeneously in the given proportions. After the mixture is prepared, it should be applied within the specified time. 4 – 24 hours should be waited between coats. Floor Recommendation: Absorbent surfaces: 2 layers Glossy surfaces (ceramic, marble, etc.): 1 coat Consumption: 2 layers: 150 – 200 g/m² 1 layer: 75 – 100 g/m² Coverage Area 4 kg set: 20 – 26 m² Packaging and Storage Packaging: 4 kg set Colour: Transparent / Transparent Shelf Life: 24 months Storage: Should be stored in a cool and dry environment