Isonem MS80 3.5 L Exterior and Transparent Water Insulation

Product Description

ISONEM Siloxan Transparent Waterproofing Impregnation is a professional insulation solution with high penetration properties that protects absorbent surfaces on exterior surfaces against water without damaging their appearance and texture. It does not form a film layer; It preserves the natural appearance of the surface and does not prevent it from breathing. Thanks to its siloxane-based formula, it penetrates deeply into the surface and creates a water-repellent (hydrophobic) effect, providing long-term protection against rain, moisture and external factors. It prevents salt vomiting, darkening and staining on pressed brick, natural stone, concrete and plaster surfaces. It protects the thermal insulation performance of structures by preventing wetting, provides resistance to frost damage and extends the life of the structure. ISONEM Siloxan impregnation is an ideal solution that provides effective waterproofing while preserving the aesthetic appearance. Highlights Transparent, does not spoil the natural appearance Does not form a film (breathes) High penetration (≥ 10 mm) Strong water-repellent (hydrophobic) effect High UV and alkali resistance Prevents salt vomiting and staining Protection against frost and rain damage Long-lasting and economical solution Technical Specifications Density: 0.75 ± 0.10 g/mL Viscosity: 0 – 500 mPa.s Penetration Depth: ≥ 10 mm (Class II) Water Absorption: < 7.5% (< 10% after alkaline) Drying Performance: > 10% (Class II) Solvent: Water Areas of Use Exterior waterproofing Natural and artificial stone surfaces Concrete and plastered surfaces Press brick applications Historical buildings and decorative facades Application Information Surface Preparation: The surface must be dry, clean and sound. It should be cleaned of dust, oil and dirt. If there are cracks, they should be repaired beforehand. Application Method: It is applied from top to bottom with a brush, roller or spray. The surface should be completely saturated by applying at least two coats (wet on wet). Consumption: 100 – 200 mL/m² (depending on surface absorbency) Coverage Area 3.5 L: approx. 17.5 – 35 m² Packaging and Storage Packaging: 3.5 L tin can Color: Transparent Shelf Life: 24 months Storage: Should be stored in a cool, dry and away from sunlight environment