Isonem D10 Latex 5 L Adherence Enhancer

Product Description

ISONEM D 10 Latex is a water-based acrylic emulsion based additive and primer product that increases adherence, provides elasticity and increases strength in cement-based mortar, concrete, plaster and screed applications. Thanks to its single-component structure, it can be used both by applying it to the surface and by adding it to the mortar. It creates a strong adhesion bridge on the surface, ensuring the perfect interlocking of old and new materials. In this way, it minimizes the risk of lifting, swelling and separation in coating, ceramic, insulation and repair applications. ISONEM D 10 Latex prevents the formation of cold joints, reduces shrinkage cracks and increases the water retention capacity of the mortar, ensuring a healthier setting. It also increases wear resistance, prevents dust formation and provides resistance to freeze-thaw cycles. Highlights Adhesion enhancing effect Provides elasticity and reduces crack formation Increases mortar and concrete performance Prevents cold joint formation Increases water retention capacity Reduces dust and wear Increases freeze-thaw resistance Water-based, environmentally friendly structure Technical Specifications Density: 1.00 ± 0.10 g/mL pH: 7.0 – 9.0 Viscosity: 500 – 1500 mPa.s Solids Ratio: 18% ± 2 Water Transfer: < 0.1 kg/m² (Class W3) Adhesion Strength: ≥ 0.8 – 1.5 N/mm² Water Vapor Permeability: 5 ≤ SD ≤ 50 (Class II) Solvent: Water Areas of Use Cement based mortar and concrete mixtures Plaster and screed applications Ceramic and tile adhesives Repair mortars and concrete repairs cold joint areas Primer applications before insulation Application Information Surface Preparation: The surface must be clean, sound and free of all residues that may reduce adherence. It can be applied on slightly damp surfaces. Use for Adhesion Purposes: It is applied to the surface without dilution at a rate of approximately 200 g/m². Mortar application should be done within 30-40 minutes. As Mortar Additive: Approximately 1 kg is added for 1 m³ of mortar/concrete In elastic mortar applications: Approximately 1 kg is added to 20 kg of mortar. consumption For adherence: 200 mL/m² Mortar additive: 1 L/m³ Coverage Area 5 L: 25 m² (adhesion) / 5 m³ (mortar additive) Packaging and Storage Packaging: 5 L Color: Transparent Shelf Life: 24 months Storage: Should be stored in a cool and dry environment